BGRNQ - ZE-3 ZYGLO EMULSIFIER

  • MSDS: BGRNQ
  • Manufacturer: MAGNAFLUX CORP
  • Product Name: ZE-3 ZYGLO EMULSIFIER
  • National Stock Number: 6850-01-263-8218
Product Identification

Product ID:ZE-3 ZYGLO EMULSIFIER
MSDS Date:06/22/1989
FSC:6850
NIIN:01-263-8218
Kit Part:Y
MSDS Number: BGRNQ

Responsible Party
MAGNAFLUX CORPORATION
7300 W LAWRENCE AVE
CHICAGO, IL 60656-3504
US

Emergency Phone: 708-867-8000

Info Phone: 708-867-8000

Preparer: BRUCE C. GRAHAM

Cage: 37676

Contractor
ILLINOIS TOOL WORKS INC MAGNAFLUX DIV
GLENVIEW, IL 60025 US

Telephone: 847-657-5300/

Cage: 37676

Ingredients

MINERAL OIL (EXPOSURE REGULATED AS 'OIL MIST')

CAS: 8012-95-1

RTECS: PY8030000

Fraction By Weight: 50.0%

OSHA PEL 5 MG/M3

ACGIH TLV: 5 MG/M3/10 STEL;9192


"NOT HAZARDOUS" INGREDIENTS

Fraction By Weight: 50%

Hazards

Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:MAY IRRITATE EYES.SEE
OVEREXPOSURE SYMPTOMS.
Effects of Overexposure:INHALATION:NOT LISTED BY
MANUFACTURER.HOWEVER,FINE SPRAY/MIST MAY CAUSE IRRITATION TO
BREATHING PASSAGES; EYES:LIQUID/MIST CAUSES IRRITATION;
SKIN:PROLONGED OR REPEATED CONTACT CAUSES IRRITATION BY DI SSOLVING
SKIN OILS; INGESTION:NOT NOTEDBY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY THE MANUFACTURER.

First Aid

First Aid:INHALATION:REMOVE TO FRESH AIR; SKIN:REMOVE CONTAMINATED
CLOTHES.WASH OFF PROMPTLY WITH SOAP AND WATER.USE SOOTHING
LOTION.GET MEDICAL HELP IF IRRITATION PERSISTS; EYES:IMMEDIATELY
RINSE EYES WITH COP IOUS AMOUNT OF WATER.GET MEDICAL ASSISTANCE IF
IRRITATION PERSISTS; INGESTION:NOT STATED BY MANUFACTURER.GET
MEDICAL ATTENTION IF INGESTED.

Fire Fighting

Flash Point Method:PMCC
Flash Point:325F/163C
Extinguishing Media:CARBON DIOXIDE,FOAM.
Fire Fighting Procedures:KEEP CONTAINERS COOL WITH WATER SPRAY.
Unusual Fire/Explosion Hazard:WHEN INVOLVE IN COMBUSTION,MAY EMIT TOXIC
GASES AT OR ABOVE DECOMPOSITION TEMPERATURE.

Accidental Release

Spill Release Procedures:REMOVE IGNITION SOURCES.SM QTY:WIPE UP OR MOP
UP BUT DO NOT BREATHE VAPORS.PLACE RAGS IN CLOSED DRUMS; LG
QTY:WEAR PERSONAL SAFETY EQUIPMENTS.DIKE AREA FAR AHEAD.ABSORB
LIQUID WITH COMMERCIAL ABSORBEN T.TRANSFER WASTE MATL IN SALVAGE
TANKS.

Handling

Handling and Storage Precautions:STORE AWAY FROM HEAT SOURCES IN WELL
VENTILATED AREA.AVOID AGAINST PHYSICAL DAMAGE TO CONTAINERS.KEEP
CONTAINERS TIGHTLY CLOSED.
Other Precautions:DO NOT BREATHE VAPORS.DO NOT SMOKE WHILE USING.DO NOT
HEAT ABOVE 130F(54C).AVOID FREQUENT OR PROLONGED SKIN CONTACT.

Exposure Controls

Respiratory Protection:USE NIOSH APPROVED RESPIRATORS FOR CONFINED
AREAS.
Ventilation:GENERAL ROOM VENTILATION TO KEEP BELOW TLV LIMITS.
Protective Gloves:USE NITRILE RUBBER GLOVES IF NEEDED.
Eye Protection:FULL GOGGLES/SAFETY GLASSES W/SIDESHIELD
Other Protective Equipment:NOT KNOWN.
Work Hygienic Practices:WASH OFF PROMPTLY WITH WATER.AVOID SKIN
CONTACT.
Supplemental Safety and Health
NSN IS FOR A 2 PARTS SET OF MIL-I-25135D I/A/W QPL-25135-15,THE SET
UNDER TYPE I,METHOD B,LEVEL 2 MAY CONSIST OF ZL-2C OR ZL-2D
PENETRANT AND ZE-3 OR ZE-4B EMULSIFIER.THIS ENTRY DESCRIBES
ZE-3;THE QPL ALSO INDICATES THAT THIS PRODUCT CAN GO IN SEVERAL
OTHER KITS OF TYPE I,METHOD A,B,C,D & LEVEL 1,2,3,4;KEY1:N1.

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:>450F/232C
Vapor Pres:0.3 @100F
Vapor Density:>1.0
Spec Gravity:0.75
pH:8.0
Solubility in Water:NEGLIGIBLE
Appearance and Odor:VISCOUS PINK LIQUID.

Stability

Stability Indicator/Materials to Avoid:YES
NONE STATED BY MANUFACTURER.
Stability Condition to Avoid:HEAT,HIGH TEMPERATURES.
Hazardous Decomposition Products:EMITS OXIDES OF CARBON IF BURNING.

Disposal

Waste Disposal Methods:INCINERATE OR DISPOSE OF AS EPA HAZARDOUS WASTE
D001 (IGNITABLE WASTE),IN ACCORDANCE WITH ALL APPLICABLE
FEDERAL,STATE,LOCAL REGULATIONS;IF LOCAL AUTHORITIES PROHIBIT
DUMPING RINSINGS DOWN THE SEWER,P URIFY RINSINGS WITH MAGNAFLUX
WASTEWATER TREATMENT

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.